Bolts
stainless steel | carbon steel | alloy steel | specials
Standard and Custom Bent bolts from ITA Fasteners are durable and corrosion resistant because of the stainless steel, alloy steel or carbon steel make. These bolts find their use mostly in construction as a result of its ruggedness and wide application range. The fasteners and anchors of the foundations and roofs of most buildings are secured using these bolts. They are also used in pipes, motors, generators and combustion engine components. Our Bent bolts meet the toughest compliances and tolerances so that your finished product can be tough and durable.
The bend of the bolt is used to keep materials in place without providing any room for radical movement. Once the bolt is secured, it acts as the perfect joint for heavy loads. Depending on your application's requirement, we also provide Bent bolts in zinc plated coating and galvanised coating. In unconventional usage, these bolts might also be used for wire and cable fastening.
As per customer's requirement
A-Thread Diameter(Metric/Inches)a
B-Internal distance between 2 legs
C-U Bolt Length
D-Thread Length
Please Note:
a-If the Thread dia is different from shank dia-it should be mentioned seperately
b-There are 2 bend of 90° in the Square Bend U-Bolt
A-Thread Diameter(Metric/Inches)a
B-Internal distance between 2 legs
C-U Bolt Length
D-Thread Length
Please Note:
a-If the Thread dia is different from shank dia-it should be mentioned seperately
b-There is a single bend of 180°
c-The dimensions can be mentioned in Metric or Inches
D-Thread Diameter(Metric/Inches)a
L-Total Length
T-Thread Length
B-Inside Length between 2 legs
A-Hook Length
Please Note:
a-If the Thread dia is different from shank dia-it should be mentioned seperately
b-There are 2 bend of 90° in the Square Bend J-Bolt
c-The dimensions can be mentioned in Metric or Inches
a-Thread Diameter(Metric/Inches)a
b-Total Length
c-Thread Length
d-Inside Diameter of Bend
r-Radius
f-Hook Length
Please Note:
a-If the Thread dia is different from shank dia-it should be mentioned seperately
b-There is a single bend of 180°
c-The dimensions can be mentioned in Metric or Inches
D-Thread Diameter(Metric/Inches)a
L-Total Length
T-Thread Length
R-Radius
S-Hook Length
Please Note:
a-If the Thread dia is different from shank dia-it should be mentioned seperately
b-There is a single bend of 90°
c-The dimensions can be mentioned in Metric or Inches
D-Thread Diameter(Metric/Inches)a
L-Total Length
T-Thread Length
C-Internal length between 2 legs
B-Angle of bend
Please Note:
a-If the Thread dia is different from shank dia-it should be mentioned seperately
b-The dimensions can be mentioned in Metric or Inches
D-Thread Diameter(Metric/Inches)a
L-Total Length
T-Thread Length
C-Internal length between 2 legs
B-Angle of bend
Please Note:
a-If the Thread dia is different from shank dia-it should be mentioned seperately
b-The dimensions can be mentioned in Metric or Inches
