Rivets & Inserts
stainless steel | carbon steel | alloy steel | specials
Pop rivets from ITA Fasteners are evolved and high-end fasteners for modern assembly needs. They are used in the most demanding environments of demanding designs. Rivets are generally used in blindside applications where a fastener has to be tightened or loosened from only one end. But Pop rivets are used for its most important functionality. Special tools are required to use pop rivets which cannot be used on regular rivets. These tools are called configuration tools which can give you the perfect dimensional accuracy while using pop rivets.
They are tubular fasteners which come with a mandrel through the middle. Rivets are inserted in in the blind side, and a configuration tool is used to draw the mandrel through the body of the rivet. This makes the blind end expand, after which the mandrel can be snapped off. These rivets come in two types, ‘open' and ‘closed' ended blind rivets. It is available in stainless steel, carbon steel, and alloy steel to bear more wear and tear while also making it more corrosion resistant.
Metric: As Per Requirement
Inches: 3/32” to 1/4”
Rivet nuts from ITA Fasteners is a single piece component which has internal threads which can be considered as counterbored tubular rivets. They are...More
Helicoil wire thread inserts from ITA Fasteners are lightweight fasteners which also provide maximum structural integrity. They come with very high...More
Hex insert nuts from ITA Fasteners are used for sheet applications where a drilled or tapped thread cannot be used for structural reasons. They come...More
Round head rivets from ITA Fasteners are used in applications which require very low resistance to vibrations and small movements. They are designed...More
Countersunk rivets from ITA Fasteners come with a flat head and a tubular or shank rivet running through the length of its body. They are made with...More